Showing posts with label Z900. Show all posts
Showing posts with label Z900. Show all posts

Sunday, November 15, 2020

Fitting my heated grips .... or not !!!

I ride all year round. Generally unless it’s snowing or icy I’ll go out for a ride.

Postie had arrived

In the colder months I do admit that I get cold on the bike, even with thermals on I’m still chilly. Last year I got myself a heated vest which the o/h wired into the bike for me - basically I plug it in and I get warm and toasty. Simple. I have to say it made a huge difference to my riding as I was no longer getting cold.

A couple of things you have to remember with a heated vest are:

No. 1: Never leave home without it on during the months of October through to May;

No. 2: Remember to plug it in! It does not work if it is not plugged in.



So that’s my body taken care of but my hands were still suffering so I got myself a pair of battery heated gloves. These gloves were amazing in the cold and kept my hands warm and extremely toasty but they were so thick that I did not have the feel of the bike that I get with ‘normal’ gloves and in the end I was not wearing them as I did not like the lack of feel.

A couple of the guys I ride with fitted heated grips on their bikes and they were raving about how good they were and basically rubbing it in every time we arrived somewhere with their warm hands.

Where to put the bracket?

I was beginning to think these might sort my cold hands dilemma.

Last month I was coming back from Cornwall, some 350 odd miles, in what I would describe as horrendous wind and rain. To say I was cold and wet is an understatement. Although it turned out my waterproofs were not waterproof, my body itself was actually not too cold with the heated vest on. It was my hands that were cold. By the time I got home the decision was made that I was going to order a pair of heated grips.


Once I had dried out, the grips were ordered.


Postie arrived with my grips and now all I had to do was fit them. Hmm….with my garage skills being rather on the limited side, this was my first hurdle.

I did actually take them out of the box, saw the wires and skimmed over the instructions and then decided to put them back in the box.

I asked the o/h if he would like a little job. Uh oh, that turned out to be the wrong thing to ask – apparently he thought it would be a good idea if I learnt how to do it myself.

Bracket shaped & painted

Darn. Normally when parts arrive for the bikes/cars I usually just leave them on his workbench and then miraculously they are fitted without any assistance from me. That way really works for me. I knew I should have just left them on the workbench.

So into the garage I go. There is a bracket that you have to fit to the bars which the controller attaches to and I had to decide where it should go on my Z.

When I bought the CB it came with heated grips and the chap that fitted them adapted the said bracket and fixed it to one of the mirrors and, I have to admit, it is a neat job so I unfortunately said that I’d like it how the CB one was fitted.


I say unfortunately, because now I had to go into the spider infested workshop so said bracket could be heated and bent to shape and then painted black. Heck, how was I going to get out of this???

I am pretty amazed with myself that I lasted a whole three, maybe four minutes in the company of the spiders before I asked the o/h if he would like a cuppa and some cake – yes please he says. So I left him in the workshop and headed inside.

Old grips being removed

After about half an hour or so, the o/h comes in and asks what’s taking me so long, he’s already bent the bracket to shape and is just about to paint it. At this point I admitted that I didn’t have cake so I was baking one but he could carry on, I didn’t mind and with the promise of a home baked cake coming, o/h was happy at that – phew!

So with the bracket now fitted - it’s surprising just how long it can take to make a cake ;-), I slipped the tea and cake on the work bench and slipped out the front door to take the dog for a walk.

I tell you, it’s just like those bike washing fairies – I take the dog for a walk, come back and the bike is sparkling clean, polished and put back in the garage.


I came back from walking the dog and my heated grips are fitted and working and ready for my next ride. How cool was that!

The next morning I put the heated grips to the test on a ride out. OMG!!! They are amazing. I can’t believe the difference they make.

New grips all fitted :-)

I arrived at our breakfast stop and my hands were warm. Why have I not had these before??? 

I really like the fact that my hands were warm and I still had the feel of the bike through my ‘normal’ bike gloves. Perfect.

The next bike I buy, it’s first purchase will be a set of heated grips. 



OMG what a great excuse to buy another bike ...

BK


Oxford Products


Thank you for reading my post, I hope you enjoyed it. Please subscribe by email, just enter your email on the right.

If you could please share my blog that would be great - thank you.





Friday, February 14, 2020

My Z900 - Part 2 - Mods

Following on from Part 1, as you know I truly love my Z but I couldn’t resist changing a few bits, although it was the performance edition and came with a few extras such as rear seat cowl, front screen, tail tidy and an Akrapovic exhaust end can.




As standard, the Z does not have any sort of stone radiator guard which I personally think is something of an oversight. So before I had even picked the bike up I ordered one from eBay. This was fitted straight away and not only serves a very good practical purpose, but looks rather nice too with a nice small discreet Z900 logo on it.





When I took the demo Z for a test ride it had a small screen on it and I did notice a bit of wind hitting me on the chest but the Z I was buying had a slightly larger screen and, I’ve got to say, this made all the difference, I don’t feel the wind buffeting now. So if you have a Z900 I would heartily recommend this as an upgrade as it is it very small and discreet but makes a bigger difference than you would think just by looking at it.



I added R&G crash bungs (which go on all my bikes!). I think these are quite discreet but will save the day if you drop it in the garage or at low speed. 

The other half can confirm this as thankfully it was one of his own bikes that he dropped in the garage. I hope he’s not reading this as we’re not supposed to talk about it! 


Heel guards, these came from eBay and were only cheap but look so much better than the standard ones. I did try the usual suppliers first but nobody seems to make them for the Z900.





As I don’t take pillion (I tried this once with the other half, but it made the bike so heavy (too many pies!) I won’t be doing that again) I have a seat cowl. I took off the rear foot pegs and added an Evotech bracket for the exhaust and a blanking plate for the other side. 

This, in my opinion, really enhances the streetfighter look.




Onto the exhaust, now this was a bit of saga. Unbeknown to me, when you buy a new bike the exhaust has to conform to EU standards and therefore it still has a CAT in it which makes it too quiet, well for me anyway! 

Even though I had the Akrapovic end can, as this is a factory accessory it was not much louder than the standard exhaust so although it was a really nice looking quality product, it now lives in the shed.


So here started my journey to finding my new exhaust that had to fit certain criteria:
1. Loud;
2. Looked good on my bike;
3. Not too expensive.


Never before have I paid sooo much attention to other people’s exhaust pipes! Everywhere I went I checked out exhausts and where possible asked them very nicely to start their bikes so I could hear the exhaust.

The NEC bike show was approaching and I did a bit of research beforehand (this mainly consisted of which exhausts looked the nicest) and went to the bike show with a couple of mates. I dragged them round virtually every exhaust manufacturers stand and came home with lots of brochures.



Still I didn’t know what to do as although they look great, some were very expensive and you can’t actually hear any of them at the show. Doing some more research on the internet, I came across Delkevic which is a British company. The exhausts look really nice and they looked really good value. In the end I thought ‘Oh well, let's try it.’ and ordered one.






My friends said how pleased they were that they had spent the whole day at the Bike Show looking at and researching exhausts instead of looking at new bikes which was their whole reason for going and that their time was completely wasted :-)




I went for a complete Delkevic system with a carbon stubby end can. The cat has now gone and the exhaust looks absolutely awesome and sounds even better. It is loud and every so often is it pops and bangs and spits the odd flame. Love it.


The only change that gets made now is to put on the original pillion seat when we go touring so I can fit my microscopic tail pack on the back. This is in fact a tank bag but is at least some sort of token effort to carry the smallest amount of luggage I can get away with. 

I still firmly believe it upsets the look of the bike but I do accept that I have to carry something for long trips. Got away with it for Belgium last year ….. waiting to see if I can get away with it for this year’s European trips. 

Really do hope the other half is not reading this.

BK






Friday, February 7, 2020

My Z900 - Part 1


I love my Z.


When I did my CBT the bike I used was a Yamaha YBR 125. Before I did my CBT I had never ridden a bike before and did not even know what each lever did. It was such an easy bike to ride and I felt so comfortable on it that by lunchtime I was out on the road with the instructor. After my CBT I brought a YBR to practice on. After a few weeks of practising on my own I then started having lessons with Steve at Beacon Motorcycle Training in order to get my big bike licence.




The bike I rode during my lessons with Steve was a Kawasaki ER6 which, again, was such an easy bike to ride and I was happy on this. It was light enough for me to easily get it off the side stand and I did enjoy riding it.










When I passed my test I wasn’t sure whether to buy a ER6 as that was what I was used to but after looking around I ended up buying a Honda Hornet 600. For me, it was a perfect first big bike and I enjoyed riding it, it had plenty of grunt for me whilst I was a new rider and did everything I wanted it to do. As my instructor, Steve, said, he taught me how to pass the test, I now had to learn how to ride. This I have since realised is very true.

After a couple of happy years on the Hornet I decided I wanted a bigger engined bike.


Here was where the difficulty lay. I found that bigger bikes were a lot heavier than my Hornet which, for me, I was not comfortable with. I do have difficulty getting bigger bikes off the side stand and some I cannot even get the bike upright. Being able to do this easily for me is my main priority. I sat on a lot of bikes and took a few out for a test ride but still I couldn’t find ‘the one’.





I had been looking at a Triumph Street Triple and we were out for a ride one day and came across a Triumph garage. I was looking at the demo Street Triple and was just going to ask if I could take it for a test ride when another customer beat me to it and went off on the demo bike. I asked if I could have a test ride when the bike came back and the salesman said to come back in a couple of hours.

So off we rode and we stopped at On Yer Bike, Aylesbury for a cuppa before heading back to the Triumph garage. Whilst there it always seems obligatory to have a look around the new and used bikes to see which bikes we can drool over.


I was in the showroom looking at the Kawasakis and Tony wheeled out the Z650 for me to have a look at. Tony asked me what sort of riding I liked and I replied I’ve got a Hornet 600 and I like lots of overtaking. At which point Tony said ‘Ahh, okay then’ wheeled the Z650 back and wheeled out the Z900 that was sitting in the showroom all shiny and winking at me.






It was light enough for me to get it off the stand easily and I felt really comfortable on it and I really liked the look of it. I took it for a test ride (uh oh said the other half).

OMG it was awesome, it was so easy to ride, it’s light and nimble, it’s comfortable, the riding position is perfect, I loved it. On my way back on the test ride I was even overtaking, I was that happy and confident on it.

I got back to On Yer Bike with a huge smile on my face and bought it the one in the showroom. 



My Z is the performance edition which came with a few extras namely an akroprovkic end can, seat cowl, tail tidy and screen. In part 2 next week I will tell you about the modifications I made to my Z even though it was a new bike! I thought buying a new bike would mean that I wouldn’t need to make any but it seems I was wrong.






I absolutely love riding my Z. I have had it just over two years now and have done some 12,500 miles, been on a few long weekends away in this country and to France, Germany and Belgium it is sooooo comfortable for long rides. 

Proof you don’t need a bike designed for touring for long trips, buy the bike that you want because you love it and make it work for you.

BK

Beacon Motorcycle Training



Thank you for reading my post, I hope you enjoyed it. If you would like to subscribe by email, please enter your email on the right.
If you would like to share my blog that would be great - thank you.



An expensive coffee!!

It was a crisp sunny Sunday morning and I had a need to get out on the bike for a ride so the other half and I decided to head to Super Saus...